Team 8 CIRT Entry has been delivered

Congratulations Team 8!  Our official entry for the 2013 CIRT National Design Competition has been delivered.  Your mentors are very proud of all the work you've been able to produce over the last few weeks.  You all came through.  So take a well deserved week off and we'll see you at our next meeting on Monday March 25 at DDC. 

Now we'll begin work on our Year End presentation on May 7th.

Sandpiper playground surface design

Engineering and Storm Mitigation (Edited)

Engineering

In the aftermath of Hurricane Sandy, we faced numerous engineering challenges in rebuilding this playground. We want to minimize the amount of damage from future storm surges. The challenges we face include

•      Minimizing the effect of beach erosion from long shore drift and storm surges

•      Protecting boardwalk and playground structures from future storm damage and flooding

•      Providing a barrier between the playground and beach while still making the beach accessible

•      Providing foundations for our proposed sea wall on soil with low bearing capacity

•      Providing structures which exceeds the recommended two foot freeboard (clearance) above the proposed Advisory Base Flood Elevation (ABFE) maps for New York along Rockaway Beach

•      Providing engineering solutions to meet all of the playgrounds’ redesigned aesthetic and functional requirements.

After much thought and research the following engineering solutions were developed. Consideration was given to the relative cost, ease of construction, effectiveness, reduced maintenance cost and environmental impacts. These engineering solutions were developed to adequately satisfy the above mentioned challenges.

•      The construction of groynes provides coastal protection and minimizes the effect of beach erosion and long shore drift on the coastline

•      The construction of a seawall along the length of Sand Piper playground provides added protection of on-shore structures and prevents them from being eroded ,flooded or destroyed by the forces of wave action

•      Cost saving design using concrete and high density foam as the main components of the seawall

•      Innovative design of the seawalls façade allows access to the beach, a seating area for views of the sunset, and a supporting structure for the boardwalk

•      End bearing piles support new structures on soils of weak bearing capacity

•      Increasing the height of our park to coincide with the proposed Advisory Base Flood Elevation (ABFE) maps for New York along Rockaway Beach

•      The use of solar powered lighting fixtures to provide light for safety and for after-hours access to park facilities

•      The design of ramps to allow for access and use of our park to the physically challenged and disabled

•      The design of plumbing needs to satisfy park features and comfort stations

•      The use of innovative wave energy converters such as the “ANACONDA” for the harnessing of wave energy for power generation.

SEAWALLS

Seawalls are designed to protect the shore from being eroded or flooded. It also protects recreational activities like parks from being destroyed by the force of the waves. Seawalls reflect the energy of the wave back to the ocean. Three types of seawalls include a curve, mound, and vertical sea wall. They can be made up of concrete, steel or rubble.

GROYNES

Groynes are used for coastal protection.  Also they are structures that absorb energy from the sea on the shore, which helps reduce the impact of the energy of the coast. Unlike seawalls, groynes are usually built at right angles to prevent sand erosion. The types of groynes include concrete, wooden, steel, and rubble mound.

Plumbing design for water feature:

To satisfy the requirements of sand pipers water feature potable water from the city’s water supply will be used to ensure health and safety, system includes:

•      Backflow preventer to prevent reverse flow to city supply

•      Pumps to maintain required flow pressure

•      Valve box and activators to regulate flow and sequence of water feature

•      Piping to individual flush mount and above grade sprays and showers

•      Drains and drain pipes to convey grey water to sediment traps before being released into city waste water

 

 

Storm Mitigation

While designing our project, we elevated our playground 4.5 feet above sea level, and made our comfort stations an additional 4.5 feet above the playground level. This in turn, will help minimize the damage of storm surges. We have added two further preventative measures to prevent the effect of future storm surges from destroying our playground. A concrete and high density foam seawall will be constructed along the beachfront of the playground. Groynes will be placed at right angles to the movement of the waves extending toward the shoreline of Far Rockaway beach. We have also added “anaconda” wave generators to harvest Eco friendly energy from the waves. The anaconda wave generator works by having a wave sent through its 200 meter long tubing along with the kinetic energy that comes along with it. This device will be floating just under the surface of the sea to get as much energy possible from each wave. With this technology a single anaconda wave generator can create up to 1Mega Watt of energy, which would be enough energy to power up to 1000 homes, or in our case our playground.

Autodesk Revit BIM program

        Throughout our project, Team 8 was searching for a model that conveyed our designs for the Sandpiper playground. The BIM modeling program, Autodesk Revit, helped us create our project. BIM or building information modeling is used by Architects and engineers to design, model, and construct their projects in the field today. BIM allows users to produce 3D models and generate floor plans to fully illustrate the components of a structure. The user can construct walls, floors, roofs, windows, doors, electrical wiring, mechanical ductwork, plumbing and other objects on a 3D platform.  BIM allows for an innovative display of new ideas in the fast-growing technological society we live in today. “While using BIM, I found that it is an innovative software which provides a more in-depth understanding of the designed structure” (Tynasia Hammond, Team 8 mentee).

Autodesk Revit BIM program

Throughout our project, Team 8 was searching for a model that conveyed our designs for Sandpiper playground. The BIM modeling program, Autodesk Revit, helped us create our project. This program stands for Building Information Model. BIM is used by Architects and engineers to design and model there projects in the field today. BIM allows users to produce 3D models and generate floor plans to fully illustrate the components of a structure. The user can construct walls, floors, roofs, windows, doors, electrical wiring, mechanical ductwork, plumbing and other objects on a 3D platform.  BIM allows for an innovative display of new ideas in the fast-growing technological society we live in today. “While using BIM, I found that it is innovative software which is similar to a blueprint, but provides a more in-depth understanding of the designed structure” (Tynasia Hammond, Team 8 mentee).

storm mitigation text for boards

Storm Mitigation

While designing our project, we elevated our playground 4.6 feet above the  9 ft elevation grade above sea level of the platform, and made our comfort  stations an additional 4 feet above the 4.6 ft. elevation. This in turn, will help prevent storm surge which occurs when high winds cause the ocean water to pile up higher than the regular sea level during a storm.  We have added two preventative measures to prevent storms from destroying our playground again, a seawall which is 4 feet 6 inches and groynes which would be placed in the waters near the shoreline of our beach. The groynes will be evenly placed along the length of our playground and what they do is slow down the waves so that when they hit our seawall, which is also placed along the length of the playground, it wont damage it as much. We have also added anaconda wave generators along with with our groynes to harvest the waves natural Eco friendly energy. The anaconda wave generator works by having a wave sent through its 200 meter long tubing along with the kinetic energy that comes along with it. This device will be floating just under the surface of the sea to get as much energy possible from each wave. With this technology a single anaconda wave generator can create up to 1Mega Watt of energy, which would be enough energy to power up to 1000 homes, or in our case our playground.

engineering text for boards

Engineering

In the aftermath of Hurricane Sandy, we are faced with numerous engineering challenges in rebuilding this playground. We want to minimize the amount of damage from future storm surges. The challenges we face include

•minimizing the effect of beach erosion from long shore drift and storm surges;

•protecting boardwalk and playground structures from future storm damage and flooding;

•providing a barrier between the playground and beach while still making the beach accessible;

•providing foundations for our proposed sea wall on soil with low bearing capacity;

•providing structures which exceeds the recommended two foot freeboard (clearance) above the proposed Advisory Base Flood Elevation (ABFE) maps for New York along Rockaway Beach, and

•providing engineering solutions to meet all of the playgrounds’ redesigned aesthetic and functional requirements.

.

After much thought and research the following engineering solutions where developed.  Consideration was given to the relative cost, ease of construction, effectiveness, reduced maintenance cost and environmental impacts. These engineering solutions were developed to adequately satisfy the above mentioned challenges.

•The construction of groynes to provide coastal protection and minimize the effect of beach erosion and long shore drift on the coastline

•The construction of a seawall along the length of Sand Piper playground provides added protection of on-shore structures and prevents them from being eroded ,flooded or destroyed by the forces of wave action

•Innovative design of the seawalls façade allows access to the beach, a seating area for views of the sunset, and a supporting structure for the boardwalk

•End bearing piles support new structures on soils of weak bearing capacity

•Increasing the height of our park to coincide with FEMA new flood level directives.

the use of solar powered lighting fixtures to provide  light for safety and after hours access to park facilities

the design of ramps to allow for access and use of our park to the physically challenged and disabled

The design of plumbing needs to satisfy park features, comfort stations etc..

The use of innovative wave energy converters such as the “ANACODA” for the harnessing of wave energy for power generation.

SEAWALLS

Seawalls are designed to protect the shore from being eroded or flooded. It also protects recreational activities like parks from being destroyed by the force of the waves. Seawalls reflect the energy of the wave back to the ocean. Three types of seawalls include a curve, mound, and vertical sea wall. They can be made up of concrete, steel or rubble. Overall, sea walls have disadvantages and disadvantages.

Vertical sea walls absorb wave energy which aids in helping the coast to not be destroyed. Unfortunately, vertical sea walls get destroyed at a faster rate than other types of sea walls, and will cost a lot of money to repair.

Curved sea walls are designed so that the waves would not reach the top of the wall. The curved design of the sea wall protects the base of the wall. The disadvantage of a curved sea wall is that the material beneath the wall becomes eroded when the energy of the sea wall is reflected back into the ocean.

Mound sea walls are often used when tidal waves are not so strong. They can be made up of sandbags, stones or porous rocks

Plumbing design for water feature:

To satisfy the requirements of sand pipers water feature potable water from the cities water supply will be used to ensure health and safety, system includes:

•Backflow preventer to prevent reverse flow to city supply

•Pumps to maintain required flow pressure

•Valve box and activators  to regulate flow and sequence of water feature

•Piping to individual flush mount and  above grade sprays and showers

•Drains and drain pipes to convey grey water to sediment traps before being                                 released into city waste water

Revit progress

Amada'sTEXT

Our playground allows for the full integration of all children participating in play activities, regardless of their impairment.  It allows for the handicapped children to operate the ship’s wheel at the lower level. There are three bays of swings, which have seats in the shape of flowers. One bay of swings is exclusively for handicapped accessibility, allowing for a handicapped child to roll their wheelchair directly on to a movable platform, which swings back and forth.  We also feature a spray shower, which is flush mounted to allow mobility impaired children to use this amenity. 

We have adequate seating throughout the playground. There are twenty wooden benches along the perimeter of the playground.  Additionally, we have a hammock area where we have eight hammocks that are arranged in the shape of a life preserver. This hammock area allows for parents, elderly and nursing mothers to be able to recline in a more comfortable position.  There is a trellis feature that is shaped like palm trees, and is covered with vines to provide shade from the sun in the summer.

Another interactive feature of the playground is an eight- tentacled octopus, which is mounted above the ship.  Two of the octopus’ tentacles provide accessibility to the ship via a stair and a handicapped accessible ramp.  The other two tentacles are designed as playground slides; a 3 foot high slide for pre- school children, and a 5 foot triple wave slide for older children.  The other four tentacles wrap around the ship to give the illusion of the ship being broken in half by the octopus.

The pirate ship feature will be the main attraction of the playground.  The two halves of the ship will be joined together by a rope ladder which is open to the children and allows for them to explore both sides of the ship.  The ship features two slides at the end of the ship, which slide down to the playground deck. There is a ship’s wheel, which is on the lower level and is handicapped accessible.  The ship also features telescopes for viewing, and there three teacup rides that allow for handicapped access as well.

There is five foot high perimeter fencing that has a seaweed design integrated into the fence itself.

Access to the playground is granted through five entrances, three of which are wheelchair accessible, and allow for access to the playground from the boardwalk.  

A “bounce pad” was incorporated into our team’s design, specifically for children ages 3 to years. This bounce pad is shaped like a birds’ best, and the walls’ of the bird’s nest serve as a protective feature to keep the children from harm. The bounce pad allows for the child’s motion to trigger a gentle bouncing motion as they jump up and down on a specialized elastic surface.

Finally, the playground site will be elevated 4’6” above the beach level.

Sandy final design

Edited 'codes and guidelines' paragraph & "design process paragraph

While designing this playground, Team 8 referenced and abided to the codes and guidelines of the High Performance Landscape Guidelines/21st Century Parks For New York City for playgrounds. For example, by spacing each element of playground far enough apart, we provide opportunities for free play such as allowing children to run around. We also included a weather station and informational plaques for the vegetation and the telescopes on the pirate ship in order to provide educational opportunities for children. Because our site is located on a natural waterfront setting, we also referenced the Community Investment Collaborative for Kids Resource Guide 4. This document provided us with information on appropriate surfacing material, fall zones, and safety structures. For example, according to guide, the maximum platform height for infants and toddlers should be 24 inches, and for preschoolers, 36 to 48 inches. The resource guide also says that all playgrounds should use surfacing material that is ADA approved, requires little maintenance, and provides good drainage for wet weather conditions. Therefore, our playground is surfaced with Pebble Flex and Aqua Flex, both of which are synthetic materials that are safe to play on, the Aqua Flex also absorbs water. Team 8 used the Public Playground Safety Handbook provided by the Consumer Product Safety Commission (CPSC) to reference proper playground equipment in addition to the International Playground Equipment Manufacturers Association (IPEMA) and the American Society for Testing and Materials (ASTM):

Public Playground Safety Handbook Guidelines:

Age Appropriate Equipment:

Toddler — Ages 6-23 months	Preschool — Ages 2-5 years
• Climbing equipment under 32” high • Ramps • Single file step ladders • Slides* • Spiral slides less than 30° • Spring rockers • Stairways • Swings with full bucket seats	• Certain climbers** • Horizontal ladders less than or equal to 0” high for ages and 5 • Merry-go-rounds • Ramps • Rung ladders • Single file step ladders • Slides* • Spiral slides up to 30° • Spring rockers • Stairways • Swings – belt, full bucket seats (2- years) & rotating tire

Code for Platforms: - Platforms should be generally flat (i.e., within ± 2° of horizontal). -Openings in platforms should be provided to allow for drainage. - Platforms should minimize the collection of debris.

    

Stepped Platform Codes (Height In-between steps): - Toddlers: 7 inches. - Preschool-age: 12 inches

Design Process/ What we Learned

Communication was a very beneficial method while designing this project. For example, because we were all teenagers, we were all able to exchange our ideas of what each other’s playground experiences were like and how we could then incorporate these ideas into our playground to make it appealing to young children. We then collaborated with our mentors to find ways to create a playground design and structures that would accentuate a nearby beach area, satisfy all New York State Parks Department guidelines as well as other playground codes, and lastly remain stable amid bad weather conditions. Next, we decided that the best way to initiate our design process would be to pick a theme, so we each designed numerous charettes and then selected our theme based on which ideas were most favored or repeated based on the charrates. We then divided our team into groups including a construction and cost estimate team, who researched all of the playground equipment and materials that we would use, an engineering team that specifically worked on storm mitigation structures, a model building team that worked on a three dimensional model, and a text and layout group who summarized the work of every group. During and inbetween meetings, we also posted information on the 2013 ACE Team 8 blog in order to update ourselves on any sketches, writings, helpful information, or inspirational architectural designs. Challenges that we faced while doing this project were deciding how to elevate our playground high enough to prevent destruction if another hurricane were to happen as well as trying to select a color scheme that would be attractive to little kids, without looking overly flamboyant.

Hurricane Victim Statistics for Far Rockaway

The Rockaway peninsula consists of  a 11- mile strip of two  family homes and public housing projects facing the Atlantic Ocean.   It was one of the New York  communities that was hardest hit by Hurricane Sandy.  About 80 homes  burned down in an electrical fire sparked by the hurricane in Far Rockaway's Breezy Point neighborhood   Approximately 10,000 residents were displaced by the storm due to housing and infrastructure damages.  The federal government has provided $9.2 billion in disaster relief funds for the Northeast region, which includes victims in the Far Rockaway area.
A playground is a necessity in this area. There are over 1500 school- aged children in the Far Rockaway area surrounded this playground. There are also three elementary schools in the area, none of which have an adequate or modern playground.

Vegetation

Vegetation

Vegetation

The vegetation we selected for our site is all highly versatile. We made sure that these plants would need little to no maintenance work. The trees we’ve chosen are the Gleditsia triacanthos or commonly known as the Honeylocust and the Acer Rubrum, commonly known as the Red Maple. The Honey locust is a perennial tree able to survive without moderate irrigation,it can live up to 100 years and it grows as tall as 70 to 80 ft. The Red Maple doesn’t require a specific type of atmosphere for it to reach it’s full potential, it can grow upto 70 ft as well and it’s vibrant colors add excitement and a give off a welcoming feel to the playground. For the vines we chose Campsis Radicans (Trumpet Creeper) , this vine is going to used around our trellis because it’s a high climbing vine and it’ll help in providing a shade and helping the metal trellis remain cool. The bush we selected for ourplayground is called  Myrica pensylvanica (Bayberry Bush), this bush is very adaptable in terms excess sun and even sea salt. Achillea  millefolium is the the flower we decided on using for our playground,  commonly known as the yarrow, this flower is a perennial  and it lasts for at least 7 years and this flower also attracts butterflies which helps make the playground more appealing to  young children.

Engineering Narrative

Sand Piper Park suffered severe damage due to the passage of super storm sandy, the massive storm surges completely damaged the park, beach front and adjacent boardwalk. Since the aftermath of sandy we were faced with various engineering challenges in rebuilding this park and minimizing the amount of damage if such an event was to occur again. Challenges faced include;

·         Minimizing the effect of beach erosion from long shore drift and storm surges

·         Protect boardwalk and park structures from future storm surges and flooding

·         Provide a barrier between the park and beach while still making the beach accessible.

·         Supporting heavy protective structures on soil with weak bearing capacities

·         Providing structures which above the redefined FEMA 100 yr flood maps along the existing parks beachfront.

·         Providing engineering solutions to meet all of the parks redesigned aesthetic and functional requirements.

After much thought and research the following engineering solutions where developed, consideration was giving to the relative cost, ease of construction, effectiveness, low maintenance cost and environmental impacts. The following engineering solutions where developed to adequately satisfy the above mentioned challenges.

·         The construction of groynes to provide coastal protection and minimize the effect of beach erosion and long shore drift on the coastline

·         The construction of a seawall along the length of sand piper park which provides added protection of on-shore structures from being eroded ,flooded of destroyed by the forces of wave action

·         Innovative design of the seawalls façade to allow access to the beach, seating area for views of the sunset. and supporting structure for the boardwalk

·         the use of end bearing piles to support new structures on soil of weak bearing capacities

·         Increasing the height of our park to coincide with FEMA new flood level directives.

·         the use of solar powered lighting fixtures to provide  light for safety and after hours access to park facilities

·         the design of ramps to allow for access and use of our park to the physically challenged and disabled

·         The design of plumbing needs to satisfy park features, comfort stations etc..

·         The use of innovative wave energy converters such as the “ANACODA” for the harnessing of wave energy for power generation.

SEAWALLS

Seawalls are designed to protect the shore from being eroded or flooded. It also protects recreational activities like parks from being destroyed by the force of the waves. Seawalls reflect the energy of the wave back to the ocean. Three types of seawalls include a curve, mound, and vertical sea wall. They can be made up of concrete, steel or rubble. Overall, sea walls have disadvantages and disadvantages.

Vertical sea walls absorb wave energy which aids in helping the coast to not be destroyed. Unfortunately, vertical sea walls get destroyed at a faster rate than other types of sea walls, and will cost a lot of money to repair.

Curved sea walls are designed so that the waves would not reach the top of the wall. The curved design of the sea wall protects the base of the wall. The disadvantage of a curved sea wall is that the material beneath the wall becomes eroded when the energy of the sea wall is reflected back into the ocean.

Mound sea walls are often used when tidal waves are not so strong. They can be made up of sandbags, stones or porous rocks

Plumbing design for water feature:

To satisfy the requirements of sand pipers water feature potable water from the cities water supply will be used to ensure health and safety, system includes:

·         Backflow preventer to prevent reverse flow t o city supply

·         pumps to maintain required flow pressure

·         valve box and activators  to regulate flow and sequence of water feature

·         piping to individual flush mount and  above grade sprays and showers

·         Drains and drain pipes to convey grey water to sediment traps before being released into city waste water.

Sandpiper playground surface

This is the preliminary design for the playground surface. I would appreciate any feedback to improve the design.

All Writing So Far

Handicapped Amenities

Our playground incorporates various handicapped amenities that provide accessibility and enjoyment to all disabled persons and meets Level 1 of the New York City Parks Department Accessibility Levels. Such amenities include a 4 foot ramp on the interactive pirate ship, a handicapped swing bay that is approximately 8 feet in height and 7. 6 feet in width, and comfort stations which have both a ramp entrance and handicapped lavatory stalls. The playground also includes five entrances, one of which connects to an undulating boardwalk that can be used for wheelchair access or simply enjoyment.

Code Requirements/ Playground Safety

While designing this playground, Team 8 referenced and abided to the codes and guidelines of the High Performance Landscape Guidelines/21st Century Parks For New York City for playgrounds. For example, by spacing each element of playground far enough apart, we provide opportunities for free play such as allowing children to run around. We also included a weather station and informational plaques for the vegetation and the telescopes on the pirate ship in order to provide educational opportunities for children. Team 8 used the Public Playground Safety Handbook provided by the Consumer Product Safety Commission (CPSC) to reference proper playground equipment in addition to the International Playground Equipment Manufacturers Association (IPEMA) and the American Society for Testing and Materials (ASTM).

Elements of Playground

In our design, we divided the playground into two thematic sections, “the calming area” and “the play area”. The calming area displays a passive landscape and includes fourteen benches, which are 6 feet long, 2 feet wide, and 18 inches in height, and eight hammocks which could be used by parents for relaxation. The play area is an active landscape that includes a 33 ft. by 3.6 ft. pirate ship, equipped with various interactive objects such as telescopes, merry-go rounds, a rope bridge, a “captain’s wheel”, and an octopus structure, whose tentacles serve as slides. The area also includes a forty-eight foot swing area with three swing bays, for both school age and infant children, as well as a built –in trampoline nest that is constructed with underground spring coils and has a rubber protective barrier, so that it is safer for the use of kids from the ages of 0 to 6 years old. Lastly, we included a spray shower area for children to enjoy during the summer season and an undulating boardwalk which connects to the playground to be used by all patrons.

Inspiration for Theme

A playground, just like any other place in a child’s life such as a home or school, can be the foundation of that child’s development. Therefore, when conceptualizing the theme for this project, we were inspired to pick themes that would both revitalize a devastated community and express the enjoyment of childhood. These themes were birds and pirates. Although, at first these themes may seem hard to combine, we realized that both birds and pirates are figures that represent migrating or traveling and exploring new areas, much like youth is filled with “discovering” or taking on new adventures.  For example, the Sandpiper bird, which our site is named after migrates each winter to the North Temperate Zone after nesting in arctic regions. Birds also seemed fitting as our theme because they are colorful animals and various colors is what our team wanted to incorporate into the design of the playground  in order to make our project more appealing to the young eye. A pirate theme, we felt could provide hope towards communities of a hurricane afflicted area, because pirates are usually depicted as people who “battle” through storms and dangerous environments in search of something positive, such as gold. Essentially, because we in Team 8 are all teenagers ourselves who know the memorable experiences that a playground can have, we wanted to create a space for the 1,240 kids of ages 6 years old or under in the Rockaway Beach area to enjoy.

Description of Site

  Our site, Sandpiper Playground, is located along Rockaway Beach, specifically on the Shore Front Parkway, an area that attracts many inter-borough and outer-borough residents year round. Until 2000, the playground was titled Beach 106 Playground. Yet, in 1999 a nearly $ 138,000 renovation of the playground was funded by the Mayor and Borough President at the time, causing Sandpiper Playground to be renamed after the sandpiper bird, which indigenous to the Rockaway area. Rockaway Beach itself is a neighborhood located on the South Shore of Long Island in-between the neighborhoods of Arverne and Rockaway Park and is currently the largest urban beach in the United States. Also, as of 2010, the community has a population of 13,000 people. However, during Hurricane Sandy, a storm that developed into a category 3 hurricane once it hit the Atlantic Coast, over 10, 000 residents of Rockaway Beach were affected by the storm.

Storm Mitigation

While designing our project, we elevated our playground 4.6 feet above the  9 ft elevation grade above sea level of the platform, and made our comfort  stations an additional 4 feet above the 4.6 ft. elevation. This in turn, will help prevent storm surge which occurs when high winds cause the ocean water to pile up higher than the regular sea level during a storm.  We have added two preventative measures to prevent storms from destroying our playground again, a seawall which is 4 feet 6 inches and groynes which would be placed in the waters near the shoreline of our beach. The groynes will be evenly placed along the length of our playground and what they do is slow down the waves so that when they hit our seawall, which is also placed along the length of the playground, it wont damage it as much. We have also added anaconda wave generators along with with our groynes to harvest the waves natural Eco friendly energy. The anaconda wave generator works by having a wave sent through its 200 meter long tubing along with the kinetic energy that comes along with it. This device will be floating just under the surface of the sea to get as much energy possible from each wave. With this technology a single anaconda wave generator can create up to 1Mega Watt of energy, which would be enough energy to power up to 1000 homes, or in our case our playground.